From: Price, Jamie (JPrice@xxxxxxxxxxx)
Date: Sun Feb 04 2001 - 03:49:57 GMT-3
Just an FYI/gotcha
I think setting the dialer idle-timeout to 1 causes problems.
We're all impatient and want the line to come down quickly so we can prove
the solution but I've noticed that when the "dialer idle-timeout" is less
than the "dialer wait-for-carrier-time" then behaviour that is comparable to
what you mention here (flapping line) occurs.
Jamie
-----Original Message-----
From: Nigel Taylor [mailto:nigel_taylor@hotmail.com]
Sent: Sunday, February 04, 2001 12:38 AM
To: Cisco Group Study; CCIE_Lab Group Study
Cc: Bryant Andrews
Subject: ISDN questions ...!
I'm working through one of the labs at fatkid(401, Advanced OSPF) and =
have a couple of questions. The one part of the configuration I can't =
understand is the BRI's on R2 and R3. There is no configuration for =
the name of the calling device or called device. when I tried this the =
routers would no connect, well at least not for more than a second. =
"debug ppp nego" showed called from <unknown> hang-up. Most examples =
I've worked with makes use of the name option on the "dialer map" =
command?
My other question is specific to the "dialer idle-timeout 1 either". I =
know what the command does but with one second.
Has anyone worked through this lab and got it working with the solution =
on the site... What was your observations on the bri line.
Mines keep bouncing up and down...
TIA
Nigel..
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:35 GMT-3