From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Fri Feb 02 2001 - 18:01:23 GMT-3
Something I've been thinking about trying in the lab today, just for sh**s
and grins is putting the two config files on the flash and add two
tftp-server commands (on the existing router, not the new router). I
wouldn't need the ip helper address command. Not sure if it will
work but I don't know why not.
B.
On Fri, 2 Feb 2001, Kevin Baumgartner wrote:
> I have done it and I believe I posted something to the group a while back.
> Note for autoinstall to work you need a tftp server.
>
> Kevin
>
> At 02:17 PM 2/2/01 -0500, Brian Hescock wrote:
> >I noticed in the archive that some people had questions if you could do
> >autoinstall over frame using point-to-point, no one had tried it. I read
> >over the doc on univercd (search on "autoinstall") and you can do it:
> >
> >4R3(config-subif)#frame interface-dlci 105 prot ip 10.1.1.1
> >
> >10.1.1.1 is the ip address of the remote router that's being installed.
> >
> >But now to actually try it (should work).
> >
> >Brian
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:34 GMT-3