From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Thu Feb 01 2001 - 11:07:52 GMT-3
David,
Check here http://www.cisco.com/warp/public/700/configsec.html . There
are some sample configs for router to client. If you're using the SafeNet
IPSec client, be careful about the 1.0a vs. 1.1 issue. 1.1 needs to be used
for later versions of IOS and PIX versions 5.12 and beyond. 1.0a is for
earlier. The 1.1 is not backwards compatible. I'm not sure of the cutoff
point for IOS, but I imagine it's on CCO somewhere...
Chuck Church
CCNP, CCDP, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000 x218
-----Original Message-----
From: David Etling [mailto:detling@fdinetworking.com]
Sent: Wednesday, January 31, 2001 4:33 PM
To: ccielab@groupstudy.com
Subject: Client PC to Vpn router
Hi everyone,
I'm looking for some good documentation on client-to-router VPN's.=20
PC(3des Cisco Secure Vpn Client)-----PSTN------Internet------T1(3des =
firewall feature set A.K.A Cisco Secure)2600
TIA,
David Etling
Network Engineer
CCNP, CCDP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:33 GMT-3