From: Kyle Galusha (kgalusha@xxxxxxxxx)
Date: Thu Feb 01 2001 - 11:00:34 GMT-3
I believe you will need to be told the nsap address of the arp-server if you
are not configuring it on another router yourself. However, if you are
configuring the arp server just try a "sho lane default address". It will show
you the nsap even if you are not using lane. ilmi pulls it into the router.
You can then use the first part of the nsap for your arp servers nsap address.
Kyle
At 01:06 PM 2/1/2001 +0000, peter brown wrote:
>In a CLIP ATM config like
>
>int atm0
>ip add 10.1.1.1 255.255.255.0
>atm esi-add ........
>atm pvc 10 0 5 qsaal
>atm pvc 20 0 16 ilmi
>atm arp-server nsap ..........
>
>my question is how do you get the atm arp-server nsap information from the
>ATM switch if it is not specified. I need help.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:32 GMT-3