From: Adrian Chew (achew@xxxxxxxxxx)
Date: Tue Jan 30 2001 - 22:29:00 GMT-3
g729r8, no IP RTP header compression (one of the routers on the route
doesn't support it, 11.2, but does RSVP)... the reservation gets setup
correctly, 24k reserved.
----- Original Message -----
From: "Mark Stover" <mstover@cisco.com>
To: "'Adrian Chew'" <achew@unmail.org>; <ccielab@groupstudy.com>
Sent: Tuesday, January 30, 2001 8:00 PM
Subject: RE: VoIP RSVP Call Setup Delay
> I just did this last Saturday. I had no such issue with a delay. Is your
request getting accepted or refused? What codec are you using? Are you
requesting more bandwidth than is available on a 64K link?
>
> Mark
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Adrian Chew
> > Sent: Tuesday, January 30, 2001 3:15 PM
> > To: ccielab@groupstudy.com
> > Subject: VoIP RSVP Call Setup Delay
> >
> >
> > Anyone tried out Voice over IP with RSVP enabled? I've got
> > it working but
> > it takes 3-5 seconds to setup the reservations before I get the call
> > connected. Network is...
> >
> > R1 - Ethernet - R2 - Frame-Relay (64k) - R3
> >
> > R1 and R2 are the voice routers.
> >
> > Is there any way to speed up this process or is this expected
> > with RSVP?
> > Note this is with req-qos controlled-load.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3