From: Halaska, David (David.Halaska@xxxxxxxxxxxxx)
Date: Tue Jan 30 2001 - 17:22:55 GMT-3
I believe that the supervisor engine is faulty and would need replacing. If
you don't have a contract that can get expensive. CBL is the color blocking
logic. I think every line card has that. On the CCO site do a search on
"cbl error" and you get some info. Its all pretty sketchy though.
David Halaska
-----Original Message-----
From: Mask Of Zorro [mailto:ciscokid00@hotmail.com]
Sent: Tuesday, January 30, 2001 1:42 PM
To: cisco@groupstudy.com; ccielab@groupstudy.com
Subject: Catalyst error message
What does the following error message mean:
BOOTROM Version 2.1, Dated Jun 4 1996 12:02:33
BOOT date: 12/01/00
BOOT time: 21:38:29
SIMM RAM address test
SIMM Ram r/w 55aa
SIMM Ram r/w aa55
Uncompressing image. This will take a minute...
Module 1 failure due to CBL0, CBL1, or CBL2 Error
I was contemplating buying this sup engine until I saw the following startup
error.
Z
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3