From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Mon Jan 29 2001 - 15:21:34 GMT-3
You will have to redraw the map of the network. Don't write in the lab books!
And then put the network addresses on this map. It's also useful to put on
this map what software version is loaded on each router, and also the hardware
in each router.
I don't think you will have enough time to write down the configurations.
You might some where want to indicate what is setup between routers. Say
for example if doing NTP, what is the master, source and peer.
Kevin
At 06:51 PM 1/29/01 +0100, alain faure wrote:
>Hello,
>
>I would like some help for the lab test : do you think is good (have time)
>to draw the map of the network and write configurations down before input
> on the routers and switch ?
>
>Thank's
>
>=====
>------------------------------------------------------------
>alainfaure@yahoo.fr
>Computing networks & internet specialist
>Certified Cisco(ccna,ccnp),Microsoft(mcse),Novell(cna)
>tel./fax. 33 (0)1 45 87 95 07 PARIS(FRANCE)
>------------------------------------------------------------
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:47 GMT-3