From: Kyle Galusha (kgalusha@xxxxxxxxx)
Date: Mon Jan 29 2001 - 10:29:28 GMT-3
Config Docs say it must match the vpi not vci. Can anyone with access to ATM s
witch/router confirm this?
Kyle
At 10:10 PM 1/29/2001 +1300, Justin Menga wrote:
>Ronnie, I believe your VCI must match the subinterface number...from your
>static config, your VPI/VCI is 5/15 - try changing your subinterface number
>to 15....
>
>Caution: ATM forum reserves use of VCIs 0-31, so in a real world situation,
>never use these VCIs (except of course for QSAAL, ILMI etc...)
>
>Regards,
>
>Justin Menga CCIE #6640 MCSE+I CCSE
>WAN Specialist
>Computerland New Zealand
>PO Box 3631, Auckland
>DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
>mailto: justin.menga@computerland.co.nz
>
>
>
>-----Original Message-----
>From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
>Sent: Monday, January 29, 2001 7:42 AM
>To: ccielab@groupstudy.com
>Subject: ATM - PVC Discovery
>
>
>I want to set up pvc discovery. I have:
>
> mc3810a--------ATM---------mc3810b
>
>mc3810a:
>
>interface ATM0
> no ip address
> no atm ilmi-keepalive
> atm ilmi-pvc-discovery subinterface
> pvc 0/16 ilmi
> !
>!
>interface ATM0.5 point-to-point
> ip address 199.2.2.1 255.255.255.0
>
>mc3810b:
>
>interface ATM0
> ip address 199.2.2.2 255.255.255.0
> no atm ilmi-keepalive
> pvc 5/15
> protocol ip 199.2.2.1 broadcast
> !
> pvc 0/16 ilmi
>
>Can someone please help? I can't ping across or get the pvc to show up.
>
>If I add to mc3810a's atm 0.5 subinterface, "atm pvc 1 5 15 aal5snap inarp"
>it works. However, this obviously ain't discovery?!? Thanks.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3