From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Mon Jan 29 2001 - 06:10:03 GMT-3
Ronnie, I believe your VCI must match the subinterface number...from your
static config, your VPI/VCI is 5/15 - try changing your subinterface number
to 15....
Caution: ATM forum reserves use of VCIs 0-31, so in a real world situation,
never use these VCIs (except of course for QSAAL, ILMI etc...)
Regards,
Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Ronnie Royston [mailto:RonnieR@globaldatasys.com]
Sent: Monday, January 29, 2001 7:42 AM
To: ccielab@groupstudy.com
Subject: ATM - PVC Discovery
I want to set up pvc discovery. I have:
mc3810a--------ATM---------mc3810b
mc3810a:
interface ATM0
no ip address
no atm ilmi-keepalive
atm ilmi-pvc-discovery subinterface
pvc 0/16 ilmi
!
!
interface ATM0.5 point-to-point
ip address 199.2.2.1 255.255.255.0
mc3810b:
interface ATM0
ip address 199.2.2.2 255.255.255.0
no atm ilmi-keepalive
pvc 5/15
protocol ip 199.2.2.1 broadcast
!
pvc 0/16 ilmi
Can someone please help? I can't ping across or get the pvc to show up.
If I add to mc3810a's atm 0.5 subinterface, "atm pvc 1 5 15 aal5snap inarp"
it works. However, this obviously ain't discovery?!? Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3