From: Asbjorn Hojmark (Asbjorn@xxxxxxxxxxx)
Date: Sun Jan 28 2001 - 20:58:00 GMT-3
> When I set up router one with:
> dial-peer voice 1 pots
> destination-pattern 3255551001
> port 1/0/0
> I can dial from a second router with a pots line
> dial-peer voice 1001 voip
> destination-pattern 325555....
> session target ipv4:192.168.1.51
> However, I want to be able to set up the first router with
> destination-pattern 1001 (dropping the 325555) from the config,
> so that the local phones on its router will only have to dial
> 1001 to call it.
You can set up multiple POTS peers pointing to the same physical
port (but for many numbers, that obviously become rather tedius).
You could also use number expansion or a translation rule.
You could, for example, do 'num-exp 325555.... ....'
HTH,
-A
-- Heroes: Vint Cerf & Bob Kahn, Leonard Kleinrock, Robert Metcalfe Links : http://www.hojmark.org/networking/
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3