From: Tim Ross (ross2k@xxxxxxxx)
Date: Sun Jan 28 2001 - 19:26:59 GMT-3
I have a question about dial-peers. When I set up router one with:
dial-peer voice 1 pots
destination-pattern 3255551001
port 1/0/0
I can dial from a second router with a pots line, with the following config.
dial-peer voice 1001 voip
destination-pattern 325555....
session target ipv4:192.168.1.51
However, I want to be able to set up the first router with
destination-pattern 1001 (dropping the 325555) from the config, so that the
local phones on its router will only have to dial 1001 to call it. When I do
this, I can't dial from Router2. I thought the 1001 would match the final
four digits by default. Can I can multiple destination patterns to one
dial-peer? Such as
dial-peer voice 1 pots
destination-pattern 3255551001
destination-pattern ......1001
destination-pattern 3255551001
port 1/0/0
Thanks for any suggestions,
Tim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3