From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Sun Jan 28 2001 - 17:43:46 GMT-3
Temporarily change your configuration register to 0x2101 to allow the flash
to be writeable. Reboot into ROMMON and go whatever interface is on the
TFTP servers network. Add an IP address to your interface then do your TFTP
download. Don't forget to place your config-reg back to 0x2102 once you are
done.
----- Original Message -----
From: Libone Mhlanga <libone@digisle.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, January 28, 2001 7:47 AM
Subject: error in upgrading a 2503
> Hello,
> I am trying to upgrade a 2503 and keep getting the following error :-
>
> CCIE_3(boot)#copy tftp flash
>
> System flash directory:
> No files in System flash
> [0 bytes used, 8388608 available, 8388608 total]
> Address or name of remote host [10.10.10.2]?
> Source file name? c2500-js-l.112-18.bin
> Destination file name [c2500-js-l.112-18.bin]?
> Accessing file 'c2500-js-l.112-18.bin' on 10.10.10.2...
> Loading c2500-js-l.112-18.bin from 10.10.10.2 (via Ethernet0): ! [OK]
>
> Device needs erasure before copying new file
> Erase flash device before writing? [confirm]y
>
> Copy 'c2500-js-l.112-18.bin' from server
> as 'c2500-js-l.112-18.bin' into Flash WITH erase? [yes/no]yes
> Erasing device... eeeeeeeeeeeeeeee ...NOT erased
> Copy aborted - erase failed
> ERR: 'c2500-js-l.112-18.bin' open - device needs erasure
>
> Now it won't even pull back the old IOS version that I had backed up to
the
> tftp server !!!!
>
> Any ideas ?
>
> Thanks,
>
> Libone
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:46 GMT-3