From: Gopal@xxxxxxxxxxxxxxxxxx
Date: Fri Jan 26 2001 - 08:59:58 GMT-3
Hi,
You can't use more than 75% of the interface bandwidth for RSVP. try just
ip rsvp bandw (don't assign any bw value. it takes the default, 75%)
i played with static rsvp but forgot now. yu need to use rsvp host command
to make the router initiate reserv req.
hope this helps,
gopal
-----Original Message-----
From: Simon Hope <shope@netsatx.net>
To: ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Thursday, January 25, 2001 3:47 PM
Subject: RSVP bandwidth too high
>my IOS has an interesting output when I enter
>ip rsvp bandwidth 100000 100
>
>on an ethernet interface - version 11.2 JS
>
>Seriously tho, does any one know if static RSVP resv messages are =
>supposed to propogate back up to the sender.
>
>when I create an static RSVP_PATH with the "ip rsvp sender" then it =
>propogates automatically, and I can see it in the "sh ip rsvp sender" at =
>the router closest to the destination net
>
>however when I create an RSVP_RESV with the "ip rsvp reservation" =
>command it goes no further than the local routers reservation database - =
>ie it doesnt propogate back up the tree to the router closest to the =
>sender
>
>does anyone have some experience here with static rsvp reserves?
>
>Cheers
>
>Simon
>
>(9 days)
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:44 GMT-3