Re: ISIS and BVI/IRB

From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Tue Jan 23 2001 - 05:34:45 GMT-3


   
sorry, clns routing is part of r6, just screwed up on the past.. I tried to
change the address to 49.6666.6666.6666.00 and 49.5555.5555.5555.00 and had
the same results. R6 can see R5, but R5 can not see R6..

Thanks!
Robert

----Original Message Follows----
From: Kevin Baumgartner <kbaumgar@cisco.com>
To: robertdevito@hotmail.com
CC: ccielab@groupstudy.com
Subject: Re: ISIS and BVI/IRB
Date: Mon, 22 Jan 2001 21:28:46 -0800 (PST)

  So on router 6 you don't have "clns routing".
Also not sure about the clns address you are using.

  Is 00 valid for the first part?

  I use something like 49.0001.6666.6666.6666.00.

  Maybe don't need to 49.0001 part but it does make
more sense to do it this way.

  Kevin

>
>
> I am trying to setup ISIS over a BVI port. I will make the topology
simple:
> Vlan 3 ISL Trunk
> R5----------Cat5------R6
>
> R5 never seams to see any ISIS LSA packets from R6. I have no problem
> pinging.
>
> I provided the relevant info below. Thanks!!!
>
> Router 5:
>
> clns routing
> !
> interface Ethernet0
> ip address 140.10.150.5 255.255.255.0
> no ip directed-broadcast
> ip router isis
> !
> router isis
> net 00.5555.5555.5555.00
>
>
> If I do a "show clns is" I receive the following:
>
> r5#sho clns is
>
> System Id Interface State Type Priority Circuit Id
Format
>
>
>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
>
> Router 6
>
> !
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.2
> encapsulation isl 3
> no ip redirects
> bridge-group 3
> !
> interface BVI3
> ip address 140.10.150.6 255.255.255.0
> ip router isis
> !
> router isis
> net 00.6666.6666.6666.00
> !
> bridge 3 protocol ieee
> bridge 3 route ip
> bridge 3 router clns
> !
>
> If I do a "show clns is" I receive the following:
> r6#sho clns is
>
> System Id Interface State Type Priority Circuit Id
Format
> 5555.5555.5555 BV3 Init L2 128 0000.0000.0000.0Phase V



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3