From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Tue Jan 23 2001 - 15:49:54 GMT-3
It works for a 2621 with a desktop image set ..
>From: "Thounda Craig, Jr." <tcraig@network-data.com>
>Reply-To: "Thounda Craig, Jr." <tcraig@network-data.com>
>To: "'Nickel, Shawn'" <Shawn.Nickel@getronics.com>,
><ccielab@groupstudy.com>
>Subject: RE: Help with isl trunking on a 2620
>Date: Tue, 23 Jan 2001 10:48:51 -0500
>
>You need a 3600 or higher unless Cisco recently changed their code for
>2600's.
>(won't work).
>
>brgds,
>Thounda
>
> -----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Nickel, Shawn
>Sent: Tuesday, January 23, 2001 10:21 AM
>To: 'ccielab@groupstudy.com'
>Subject: Help with isl trunking on a 2620
>
>I have a question concerning isl trunking on the 2620. I tried to type
>"encapsulation isl" on fastethernet 0/0.1. I get the old "% Invalid input
>detected at '^' marker." When I try to type in the ip address for the
>subinterface I get the following error message "Configuring IP routing on a
>LAN subinterface is only allowed if that subinterface is already configured
>as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN." My IOS version is
>12.0(3)T3, which as far as I can tell from Cisco's website, does support
>trunking.
>
>Any thoughts/suggestions.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:40 GMT-3