From: Wayne Hu (wayneccie@xxxxxxxxx)
Date: Mon Jan 22 2001 - 12:36:09 GMT-3
Same command but use pps instead of percentage
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lab Guy
Sent: Monday, January 22, 2001 9:26 AM
To: ccie
Subject: Catalyst broadcast filter
My scenario is that I want to limit broadcasts on a
port on the Catalyst. Assume I don't want broadcast
to consume any more than 20%. I know I can do a:
set port broadcast 2/1 20%
But what if I'm given an average size of the ethernet
packet. Assume 750 bytes. How would I figure this
out?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:39 GMT-3