From: Curtis Phillips (phillipscurtis@xxxxxxxxxxxx)
Date: Sat Jan 20 2001 - 02:01:10 GMT-3
Documentation for the LS100 being scant and cryptic at best, I wonder if
anyone has an idea how to set the interface parameters on the LS100 to
allow the correct number of VPI and VCI bits.. Apparently this is the
problem as I am unable to get the thing to register with the router anything in
VPI 0. I would assume on the primary interface. I am further unable to get th
e switch to allow me to configure a pvc with a vpi of 1 or more. Any informati
on would be appreciated.
Curtis
<erik@pinnacleinc.com> wrote:
>
> yes
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Curtis Phillips
> Sent: Friday, January 19, 2001 5:02 PM
> To: ccielab@groupstudy.com
> Subject: PVC discovery on an LS100
>
>
> Hello,
>
> Does nayone know if the LS100 will work with a router to support ilmi pvc
> discovery?
>
> Thanks in advance,
>
> Curtis
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:36 GMT-3