From: R. Benjamin Kessler (ben@xxxxxxxxxxxxxxxxxxxxx)
Date: Fri Jan 19 2001 - 15:53:36 GMT-3
how about
boot config
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bob Harrison
Sent: Friday, January 19, 2001 12:32 PM
To: ccielab@groupstudy.com
Subject: saving large configs to flash instead of NV?
We have a problem with a really large config that will
not fit into NVRAM (don't even get me started :)) I
know there is a way we can copy the config into flash
and have already done that. The problem is what do we
need to change in the reg or the config so that the
router would boot its config file from flash in case
of an unintended reload? I have tried:
copy running-config flash
works and the file shows in show flash. Then I set the
boot system flash:running-config command. Reload and
it doesn't work. Is there an additional registry
setting that we need to set to make it work? Platform
is 5300.
Thank you!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:36 GMT-3