From: Maljure, Sanjay (smaljure@xxxxxxxxx)
Date: Fri Jan 19 2001 - 12:39:45 GMT-3
Hi everyone.....
I was wondering if anybody could help me out with the following output.
This is a 1750 router with a built-in CSU/DSU
I notice several errors being displayed. What do these various terms
mean? What is the difference between 'Line Code Violations' and 'Path
Code Violations'? Any help would be appreciated. Thanks for your time.
Router#show service-module
Module type is T1/fractional
Hardware revision is 0.104, Software revision is 0.2,
Image checksum is 0xED22BEC5, Protocol revision is 0.1
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 4 timeslots (64 Kbits/sec each), Net bandwidth is 256
Kbits/sec.
Last module self-test (done at startup): Passed
Last clearing of alarm counters 23:40:06
loss of signal : 7, last occurred 02:25:42
loss of frame : 9, last occurred 02:25:42
AIS alarm : 0,
Remote alarm : 0,
Module access errors : 0,
Total Data (last 94 15 minute intervals):
2357 Line Code Violations, 2295 Path Code Violations
2 Slip Secs, 917 Fr Loss Secs, 732 Line Err Secs, 0 Degraded Mins
3 Errored Secs, 0 Bursty Err Secs, 1 Severely Err Secs, 916 Unavail
Secs
Data in current interval (430 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
Router#
Sanjay Maljure
CCIE# 6286
Enterprise Systems Consultant
Ciber, Inc.
Tel - 732.225.1700
Fax - 732.225.1973
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:35 GMT-3