From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Fri Jan 19 2001 - 07:17:12 GMT-3
Had the same problem with my 4000. I notice if you wait about 60 sec after
it hangs and do a <break> it will eventually continue.. Try a differ version
of IOS.
Robert
----Original Message Follows----
From: "Lee Newman" <jlznewman@hotmail.com>
Reply-To: "Lee Newman" <jlznewman@hotmail.com>
To: <ccielab@groupstudy.com>
Subject: I screwed up..!! Help!!
Date: Thu, 18 Jan 2001 21:54:07 -0600
Well, it appears as though I screwed up trying to upgrade the IOS on my =
4000 Router, I just put C4000-is-mz.120-10.bin code on it and rebooted. =
It stops during the reboot on:
Processor board ID 5037810
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
2 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
It just hangs right here..
Does anyone know how I can remedy this problem??
Any help with be much appreciated..
Lee
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:34 GMT-3