I screwed up..!! Help!!

From: Lee Newman (jlznewman@xxxxxxxxxxx)
Date: Fri Jan 19 2001 - 00:54:07 GMT-3

• Next message: Arthayuth.B@xxxxxxxxxxxxxxxxxx: "RE: OSPF Demand circuit on backup interface"
• Previous message: Matt Harrison: "Re: M4 Phillips countersunk-head screws"
• Next in thread: cdmurray@xxxxxxxxxxxxxxx: "Re: I screwed up..!! Help!!"
• Maybe reply: cdmurray@xxxxxxxxxxxxxxx: "Re: I screwed up..!! Help!!"
• Maybe reply: Claude-Vincent: "Re: I screwed up..!! Help!!"
• Maybe reply: Robert DeVito: "Re: I screwed up..!! Help!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Well, it appears as though I screwed up trying to upgrade the IOS on my =
4000 Router, I just put C4000-is-mz.120-10.bin code on it and rebooted. =
It stops during the reboot on:

Processor board ID 5037810
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
2 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
128K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)

It just hangs right here..

Does anyone know how I can remedy this problem??

Any help with be much appreciated..

Lee

• Next message: Arthayuth.B@xxxxxxxxxxxxxxxxxx: "RE: OSPF Demand circuit on backup interface"
• Previous message: Matt Harrison: "Re: M4 Phillips countersunk-head screws"
• Next in thread: cdmurray@xxxxxxxxxxxxxxx: "Re: I screwed up..!! Help!!"
• Maybe reply: cdmurray@xxxxxxxxxxxxxxx: "Re: I screwed up..!! Help!!"
• Maybe reply: Claude-Vincent: "Re: I screwed up..!! Help!!"
• Maybe reply: Robert DeVito: "Re: I screwed up..!! Help!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:34 GMT-3