From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Thu Jan 18 2001 - 18:57:09 GMT-3
Ronnie,
Once you define your ilmi pvc and add the esi address, it should
automatically contact the ls1010 and receive your nsap address. What does
your config look like? I had plenty of other issues with ATM, but not
getting my NSAP address was not an issue.
Robert
----Original Message Follows----
From: Ronnie Royston <RonnieR@globaldatasys.com>
Reply-To: Ronnie Royston <RonnieR@globaldatasys.com>
To: ccielab@groupstudy.com
Subject: ATM - NSAP advertisement by a Router?
Date: Thu, 18 Jan 2001 12:46:14 -0600
Does anyone know if you can set up a router to advertise the nsap to
attached end ATM devices? I've got 2 MC3810s and I'd like to configure the
ESI only on one of them and have him learn the prefix from the switch. I've
tried to simply configure one device with a complete nsap and enabled pvc
0/16 ilmi between the 2, but the router with only the ESI configured shows
all 0's for his prefix, i.e., it don't work.
Is this possible to do, or do I need a switch, or am I missing a command
that tells the one router to advertize prefixes? Any help is greatly
appreciated!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:34 GMT-3