From: Joe Thelander (jtheland@xxxxxxxxx)
Date: Thu Jan 18 2001 - 04:07:00 GMT-3
>Hi,
>
>I have a two question about multicast that I hope you can help me with.
>
>1. I can set up routers to do multicast routing, no problem, however I don't
>know how to to verify correct operation. Only thing I've been able to come
>up with is to put an "ip igmp join-group" command on an interface, which
>kind of simulates a workstation joining the group. I haven't found a way
>to use a router to simulate a multicast sender. What is the preferred
>method to simulate senders and receivers using only routers?
>
>2. If the test doesn't specifically mention cgmp are you still required
>to set cgmp up between the catalyst and the routers, i.e.
On the Catalyst:
set cgmp multicast enable
set multicast router module/port
set cgmp leave enable
On the router
int e0
ip cgmp
>thx,
>-Joe
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3