From: Frank Buffington (frank@xxxxxxxxxxxx)
Date: Thu Jan 18 2001 - 00:50:49 GMT-3
Steve,
When you set a default route it's only used if there's no route in the
routing table. Well the same thing applies here. If you use:
set ip default next-hop 137.20.29.2
that will set the next hop only if there is no route in the routing table for
packets matching access-list 1.
If you want to change the next-hop for all packets matching your access-list 1
then use:
set ip next-hop 137.20.29.2
Hope this helps. v/r, Frank
Steve Clubb wrote:
> Hey people -
>
> I have a situation where I want to forward traffic going to a certain subnet
> out an interface or to a next-hop IP. All other traffic to take the default
> route configured on the router. I can't use a static route. I tried this
> but it's not working. Any ideas?
>
> ip local policy route-map policy
> ip classless
> ip route 0.0.0.0 0.0.0.0 64.168.75.12
> !
> access-list 1 permit 137.20.0.0 0.0.255.255
> access-list 2 permit any
> !
> !
> !
> route-map policy permit 10
> match ip address 1
> set ip default next-hop 137.20.29.2
> !
> route-map policy permit 20
> match ip address 2
>
> Thanks,
>
> Steve
>
>
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3