From: Erick B. (erickbe@xxxxxxxxx)
Date: Wed Jan 17 2001 - 15:17:12 GMT-3
Question on ILMI PVC discovery. Is this a Cisco
propiertary feature and how do you debug the discovery
process and see PVCs being discovered? The reason I
ask is that I have a Fore switch in my ATM mix and I
don't think this is working. Regular PVCs and SVCs
work fine.
--- "Padhu (LFG)" <padhu@steinroe.com> wrote:
> anyone on the list who have access to ATM gear - Can
> u guys confirm this
> pattern or suggest any ideas here to fix ?
>
> Cheers,Padhu
>
> -----Original Message-----
> From: Robert DeVito
> [mailto:robertdevito@hotmail.com]
> Sent: Wednesday, January 17, 2001 10:39 AM
> To: padhu@steinroe.com; ccielab@groupstudy.com
> Subject: RE: atm ilmi-pvc-discovery
>
>
> That was my exact problem.... Any thoughts??
>
>
>
> ----Original Message Follows----
> From: "Padhu (LFG)" <padhu@steinroe.com>
> To: 'Robert DeVito' <robertdevito@hotmail.com>,
> ccielab@groupstudy.com
> Subject: RE: atm ilmi-pvc-discovery
> Date: Wed, 17 Jan 2001 10:19:54 -0600
>
> I tried this a few weeks ago and couldn't get this
> to work with eigrp
> ...debug ip pack shows encaps failed ...although it
> assigned the pvcs to the
> "correct numbered " subinterface that i had created.
> It was rental so didnt
> have too muh time to figure it
>
> -----Original Message-----
> From: Robert DeVito
> [mailto:robertdevito@hotmail.com]
> Sent: Wednesday, January 17, 2001 12:10 AM
> To: ccielab@groupstudy.com
> Subject: atm ilmi-pvc-discovery
>
>
> Did anyonve have any problems with
> ilmi-pvc-discovery command and running
> routing protocolss over the atm pvc? If I manually
> configure the atm pvc's
> mappings into the router eigrp works great, but if I
> use ilmi auto
> discovery, I was never able to form adjancey over
> EIGRP...Thoughts?
>
> Thank you,
> Robert
>
> configs:
> R7
> !
> !
> interface ATM1/0
> ip address 192.168.12.7 255.255.255.0
> no ip directed-broadcast
> map-group ccie
> atm pvc 1 0 16 ilmi
> atm ilmi-pvc-discovery
> no atm ilmi-keepalive
> !
> router eigrp 1
> network 192.168.7.0
> network 192.168.12.0
> no auto-summary
> !
> ip classless
> no ip http server
> !
> !
> map-list ccie
> ip 192.168.12.8 atm-vc 3 broadcast
>
> r7#sho ip eigrp nei
> IP-EIGRP neighbors for process 1
>
************************************************************************
> R8
> !
> interface ATM1/0
> ip address 192.168.12.8 255.255.255.0
> no ip directed-broadcast
> atm pvc 1 0 16 ilmi
> no atm ilmi-keepalive
> atm ilmi-pvc-discovery
> map-group ccie
> !
> router eigrp 1
> network 192.168.8.0
> network 192.168.12.0
> no auto-summary
>
> !
> map-list ccie
> ip 192.168.12.7 atm-vc 3 broadcast
>
> r8#sho ip eigrp nei
> IP-EIGRP neighbors for process 1
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:33 GMT-3