From: Claude-Vincent (claude_vincent@xxxxxxxxx)
Date: Mon Jan 15 2001 - 23:19:27 GMT-3
On my 2523:
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname hub
!
logging rate-limit console 10 except errors
!
username spoke1 password 0 cisco
ip subnet-zero
no ip finger
no ip domain-lookup
!
...
!
isdn switch-type ntt
cns event-service server
interface BRI0
ip address 10.1.1.2 255.255.255.0
encapsulation ppp
dialer idle-timeout 300
dialer map ip 10.1.1.1 name spoke1 broadcast XXXX
dialer-group 1
isdn switch-type ntt
ppp authentication chap
!
ip kerberos source-interface any
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
ISDN stat:
hub#sh isdn stat
Global ISDN Switchtype = ntt
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = ntt
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 70, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
On my 2504:
interface BRI0
ip address 10.1.1.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 300
dialer map ip 10.1.1.2 name hub broadcast YYYY
dialer-group 1
isdn switch-type ntt
ppp authentication chap
!
no ip http server
ip classless
!
dialer-list 1 protocol ip permit
!
ISDN Sta:
spoke1#sh isdn stat
Global ISDN Switchtype = ntt
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = ntt
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 70, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
Total Allocated ISDN CCBs = 0
When I ping from the 2504, I have got:
00:40:43: Channel ID i = 0x89
00:40:43: ISDN BR0: RX <- ALERTING pd = 8 callref = 0x86
00:40:43: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x86.
00:40:43: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up...
00:40:50: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to XXXX .
Success rate is 0 percent (0/5)
spoke1#ping 10.1.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
And from the 2523:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
00:39:46: ISDN BR0: TX -> SETUP pd = 8 callref = 0x04
00:39:46: Bearer Capability i = 0x8890
00:39:46: Channel ID i = 0x83
00:39:46: Called Party Number i = 0x80, '0335113025', Plan:Unknown,
Type
:Unknown
00:39:46: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x84
00:39:46: Channel ID i = 0x89
00:39:47: ISDN BR0: RX <- ALERTING pd = 8 callref = 0x84.
00:39:47: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x84
00:39:47: ISDN BR0: HOST_CONNECT: VOICE ERROR: Bearer capability not
available(0
x3A): bchan 0, call id 0x8004....
Success rate is 0 percent (0/5)
Vincent
----- Original Message -----
From: "Santarsiero, Bill" <BSantarsiero@greenwichtech.com>
To: "'Claude-Vincent'" <claude_vincent@yahoo.com>; "'Ccielab"
<ccielab@groupstudy.com>
Sent: Monday, January 15, 2001 10:46 PM
Subject: RE:
> Can you do a "sho isdn status" and send that as well. Include your
configs
> for the two routers also.
>
> -----Original Message-----
> From: Claude-Vincent [mailto:claude_vincent@yahoo.com]
> Sent: Monday, January 15, 2001 5:30 AM
> To: 'Ccielab
> Subject:
>
> Dear all,
>
> I am playing with an ISDN line and I don't succeed to make it work! Does
> anyone know what it means?
> Hub#ping 10.1.1.1
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
> 1d07h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0D
> 1d07h: Bearer Capability i = 0x8890
> 1d07h: Channel ID i = 0x83
> 1d07h: Called Party Number i = 0x80, 'XXXX', Plan:Unknown,
> Type:Un
> known
> 1d07h: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8D 1d07h:
> Channel ID i = 0x89 1d07h: ISDN BR0: RX <- ALERTING pd = 8 callref =
0x8D.
> 1d07h: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x8D
> 1d07h: ISDN BR0: HOST_CONNECT: VOICE ERROR: Bearer capability not
> available(0x3A
> ): bchan 0, call id 0x800D....
> Success rate is 0 percent (0/5)
> Hub#u all
> All possible debugging has been turned off
> Hub#sh dial
>
> BRI0 - dialer type = ISDN
> Dial String Successes Failures Last DNIS Last status
> XXXX 0 0 00:00:20 failed
> 0 incoming call(s) have been screened.
> 0 incoming call(s) rejected for callback.
>
> BRI0:1 - dialer type = ISDN
> Idle timer (120 secs), Fast idle timer (20 secs)
> Wait for carrier (30 secs), Re-enable (15 secs)
> Dialer state is idle
> BRI0:2 - dialer type = ISDN
> Idle timer (120 secs), Fast idle timer (20 secs)
> Wait for carrier (30 secs), Re-enable (15 secs)
> Dialer state is idle
> Thanks
> Vincent
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:31 GMT-3