From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Mon Jan 15 2001 - 21:37:02 GMT-3
I've already requested "gotchas" for networking in general (not specific
to the lab) and said I would organize them and post the results to
everyone. I received a grand total of about five responses.
Brian
On Tue, 16 Jan 2001 cdmurray@statestreet.com wrote:
>
> Phil,
>
> Can only be a good idea
> How about we label it in the subject area so we can identify it.
> Something like:
> "got to knows and gotchas" or "trips and traps" or "tamagotchies"
>
>
>
> Christine Murray
> Enterprise Technology Team
> Level 3, 338 Pitt, Sydney 2000
> State Street Australia Ltd
> Ph: 612-93236124
>
>
>
>
> "Virnoche,
> Phil" To: "CCIE newsgroup (E-mail)"
<ccielab@groupstudy.com>
> <phil.virnoche@ cc:
> attws.com> Subject: Be a contributor ????
> Sent by:
> nobody@groupstu
> dy.com
>
>
> 01/16/01 08:05
> AM
> Please respond
> to "Virnoche,
> Phil"
>
>
>
>
>
>
> Good afternoon gang,.......
>
> I woke up this morning with an idea. The idea is this...... I want to start
> a list of "got to knows and gotchas". As I work through my practice labs, I
> run across things that are so damn important to know for this lab
> preparation. I find it nearly impossible to know everything. What I am
> hoping will happen to this thread is that others will "add" their "got to
> knows and gotchas"....... And after awhile we should have a very nice
> collection of things that we all feel are "got to knows and gotchas" that
> we
> can ALL print out and use as a valuable collection of information. Feel
> free
> to validate or challenge others "got to knows and gotchas".......
>
> I have put together some of the areas that are the obvious heavy hitters. I
> have added my 2 cents worth of things that I feel are "got to knows and
> gotchas".......
>
> P.S. BY ALL MEANS add any other topics that you feel will be beneficial.
>
> Frame Relay
>
> * A point to point FR subinterface can have only ONE and only ONE
> dlci associated with it, and does not use map statements.
> * Multipoint subinterfaces can use map statements as well as
> inverse-arp to associate remote IP numbers to local DLCI's.
> * When FR is activated on a physical interface, split horizon is
> auto-disabled. Point toPoint and Multipoint interfaces split horizon is
> enabled.
>
> ISDN/DDR
> Cat 5000/Switching
> ATM
> Routing Protocols: RIP IGRP EIGRP
> OSPF
>
> * OSPF is not affected by the rule of split horizon.
> * OSPF problems usually can be attributed to a network type (hello
> interval) mismatch.
>
> Redistribution
> BGP
> DLSW
> VOIP
> Access Lists
> Troubleshooting
>
>
>
> Philip G. Virnoche
> Network Engineer - AT&T Wireless
> phone: 425.580.5239
> cell: 206.601.3134
>
> "HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
> pig."
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3