Re: Rép. : Re: Pinging a Local Multipoint Subinterface.

From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Mon Jan 15 2001 - 13:29:42 GMT-3

• Next message: Kabbur SR: "NEW- Fr-Sw-problem"
• Previous message: Connary, Julie Ann: "Re: BGP aggregates and IGRP default networks - policy routing is the answer"
• Maybe in reply to: Thierry MARTIN: "Rép. : Re: Pinging a Local Multipoint Subinterface."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Delete the older message Thierry you are right!
If you make a frame map with the local DLCI it will overwrite the dynamic map s
o you
have to do at least 2 frame map ....

Thierry MARTIN wrote:

> Hi David,
>
> you are wrong
>
> If you just add this statement; cloud frame relay don't run.
>
> Frame relay map statement activate no inverse arp for the specific DLCI; and
> dynamic mapping with this DLCI don't run.
>
> Solution is:
> add frame realy mapping for peering of the pvc and for local address.
>
> Exemple of config :
> !
> interface Serial0
> ip address 131.1.1.67 255.255.255.248
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> frame-relay map ip 131.1.1.65 113 broadcast
> frame-relay map ip 131.1.1.67 113 broadcast # for ping my address
> frame-relay map ip 131.1.1.66 123 broadcast
> frame-relay interface-dlci 113
> frame-relay interface-dlci 123
> !
>
> Best Regard
>
> Cordialement
>
> \\\\///
> (/ @ @ /)

• Next message: Kabbur SR: "NEW- Fr-Sw-problem"
• Previous message: Connary, Julie Ann: "Re: BGP aggregates and IGRP default networks - policy routing is the answer"
• Maybe in reply to: Thierry MARTIN: "Rép. : Re: Pinging a Local Multipoint Subinterface."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3