From: Thierry MARTIN (tmartin@xxxxxxx)
Date: Mon Jan 15 2001 - 13:28:33 GMT-3
Hi,
ONLY ONE Route Reflector by Cluster-ID.
RR is use for reduce peering.
In large BGP network, use confederation , and RR in each confederation for redu
ce peering.
Best Regard
Thierry
>>> "Horton, Jeff" <jhorton@lsfi.com> 15/01/01 14h46 >>>
Hello all,
I was trying to build a BGP scenario in the lab where I had two routers, R1
& R2 that are both route reflectors. R3, R4, and R5 are route-reflector
clients. R1 and R2 are both in cluster ID 100. Peer groups are set up for
both route reflectors and route reflector clients. The idea was that should
R1 or R2 fail, the routes would still be reflected to the clients. R1 and R2
are able to ping R3, R4, and R5 just fine.
Loopbacks are 1.1.1.1, 2.2.2.2, 3.3.3.3, etc. On RR clients R3 , R4, and R5
I also have 30.30.30.3, 40.40.40.4, 50.50.50.5 that are advertised in BGP. I
seem to have mixed results and I am not quite sure where I have gone wrong.
R3 routes seem to be reflected but not R4 or R5.
I would appreciate suggestions.
Thanks,
Jeff
R1
router ospf 1
network 1.1.1.0 0.0.0.255 area 0
network 172.168.14.0 0.0.0.255 area 0
network 172.168.125.0 0.0.0.255 area 0
!
router bgp 1
no synchronization
bgp cluster-id 100
neighbor reflectors peer-group
neighbor reflectors remote-as 1
neighbor reflectors update-source Loopback0
neighbor clients peer-group
neighbor clients remote-as 1
neighbor clients ebgp-multihop 255
neighbor clients update-source Loopback0
neighbor clients route-reflector-client
neighbor 2.2.2.2 peer-group reflectors
neighbor 3.3.3.3 peer-group clients
neighbor 4.4.4.4 peer-group clients
neighbor 5.5.5.5 peer-group clients
no auto-summary
!
R2
router ospf 1
network 2.2.2.0 0.0.0.255 area 0
network 172.168.125.0 0.0.0.255 area 0
!
router bgp 1
no synchronization
bgp cluster-id 100
neighbor clients peer-group
neighbor clients remote-as 1
neighbor clients update-source Loopback0
neighbor clients route-reflector-client
neighbor reflectors peer-group
neighbor reflectors remote-as 1
neighbor reflectors update-source Loopback0
neighbor 1.1.1.1 peer-group reflectors
neighbor 3.3.3.3 peer-group clients
neighbor 4.4.4.4 peer-group clients
neighbor 5.5.5.5 peer-group clients
no auto-summary
!
R3
router ospf 1
network 3.3.3.0 0.0.0.255 area 0
network 192.168.23.0 0.0.0.255 area 0
!
router bgp 1
no synchronization
network 3.3.3.0 mask 255.255.255.0
network 30.30.30.0 mask 255.255.255.0
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source Loopback0
neighbor 1.1.1.1 next-hop-self
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source Loopback0
neighbor 2.2.2.2 next-hop-self
no auto-summary
R4
router ospf 1
network 4.4.4.0 0.0.0.255 area 0
network 172.168.14.0 0.0.0.255 area 0
network 192.168.23.0 0.0.0.255 area 0
!
router bgp 1
no synchronization
network 4.4.4.0 mask 255.255.255.0
network 40.40.40.4 mask 255.255.255.0
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source Loopback0
neighbor 1.1.1.1 next-hop-self
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source Loopback0
neighbor 2.2.2.2 next-hop-self
no auto-summary
R5
router ospf 1
network 5.5.5.0 0.0.0.255 area 0
network 172.168.125.0 0.0.0.255 area 0
!
router bgp 1
no synchronization
network 5.5.5.0 mask 255.255.255.0
network 50.50.50.0 mask 255.255.255.0
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source Loopback0
neighbor 1.1.1.1 next-hop-self
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source Loopback0
neighbor 2.2.2.2 next-hop-self
no auto-summary
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3