From: Alan Basinger (abasinge@xxxxxxxxxx)
Date: Mon Jan 15 2001 - 12:16:31 GMT-3
I would suspect they want to test and see if we know how to create different
tunnels and also use them to keep outside routing information from leaking
into our AS and keeping our AS private, maybe just using it as a transit AS
without letting the unknown AS see our routing information???
Alan Basinger
Systems Engineer
SBC DataComm
Houston Texas
abasinge@swbell.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chuck Church
Sent: Monday, January 15, 2001 8:52 AM
To: ccielab@groupstudy.com
Subject: RE: tunnel mode ipip
But if it's IP only, do you need to use a tunnel? All the times I've setup
VPN between router to router or PIX to PIX, we've never used a tunnel.
Obviously if they want non-IP traffic, use a tunnel, but if it's IP only,
why use one? What's the way the lab proctor is going to want to see it?
Chuck Church
CCNP, CCDP, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000 x218
-----Original Message-----
From: Kevin Mahoney [mailto:kmahoney1@cfl.rr.com]
Sent: Monday, January 15, 2001 1:31 AM
To: Robert DeVito; ccielab@groupstudy.com
Subject: RE: tunnel mode ipip
yep
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Robert DeVito
Sent: Monday, January 15, 2001 6:13 AM
To: kmahoney1@cfl.rr.com; ccielab@groupstudy.com
Subject: RE: tunnel mode ipip
So if I come over a scenario that requires to set up a VPN from router A to
router B for IP only, use "tunnel mode ipip" instead of the default "tunnel
mode gre"?
Thanks in advanced,
Robert
----Original Message Follows----
From: "Kevin Mahoney" <kmahoney1@cfl.rr.com>
Reply-To: <kmahoney1@cfl.rr.com>
To: "Robert DeVito" <robertdevito@hotmail.com>, <ccielab@groupstudy.com>
Subject: RE: tunnel mode ipip
Date: Mon, 15 Jan 2001 00:50:10 -0500
Tunnel mode ipip is foe setting up VPNs where you want to tunnel ip traffic
over an ip tunnel.
Kevin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Robert DeVito
Sent: Monday, January 15, 2001 4:46 AM
To: ccielab@groupstudy.com
Subject: tunnel mode ipip
Can someone explain tunnel mode ipip? I can not find anything on the CD or
CCO... Thank you!
Robert
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3