Re: Pinging a Local Multipoint Subinterface.

From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Mon Jan 15 2001 - 10:16:28 GMT-3

• Next message: Lykourgiotis Paraskevas: "DLSW Question-Peer groups"
• Previous message: chahal: "Another Newbie"
• Maybe in reply to: Sam Pilot: "Pinging a Local Multipoint Subinterface."
• Next in thread: Paulo Mendes De Oliveira: "Re: Pinging a Local Multipoint Subinterface."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
just add a frame-relay map 172.168.111.1 503 (or 506).

Sam Pilot wrote:

> Hello Friends
>
> I have configured a Frame Relay Multipoint subinterface on a Serial
> interface.
>
> What should I configure on the router so that I am able to Ping the ip
> address of that interface.
>
> This is my config
>
> interface Serial0.1 multipoint
> ip address 172.168.111.1 255.255.255.0
> frame-relay interface-dlci 503
> frame-relay interface-dlci 506
>
> 503 and 506 are the DLCI's pointing to my spoke Routers.
> I am able to ping my remote spokes.
>
> Regards
>
> Sam
>

• Next message: Lykourgiotis Paraskevas: "DLSW Question-Peer groups"
• Previous message: chahal: "Another Newbie"
• Maybe in reply to: Sam Pilot: "Pinging a Local Multipoint Subinterface."
• Next in thread: Paulo Mendes De Oliveira: "Re: Pinging a Local Multipoint Subinterface."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:30 GMT-3