From: Atif Awan (atifawan@xxxxxxxxxxx)
Date: Fri Jan 12 2001 - 22:33:28 GMT-3
follow these steps in enable mode:
router# config t
router(config)# config-register 0x2101
router(config)# exit
router# wr mem
router# reload
It will now boot in boot mode with the flash set to read/write
Regards
Atif
>From: Earl Aboytes <Earl@dnssystems.com>
>Reply-To: Earl Aboytes <Earl@dnssystems.com>
>To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: upgrading IOS on a 2500
>Date: Fri, 12 Jan 2001 14:21:34 -0800
>
>Here is a question that seems obvious but I cannot remember exactly how =
>it
>is done. How do you change a 2500=92s flash from Read Only to =
>Read/Write? I
>cannot find this on CCO. I seem to remember something about having to =
>boot
>to rommon or the bootrom.
>Earl Aboytes, CCIE 6097
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:28 GMT-3