From: Paulo Mendes De Oliveira (pmendesd@xxxxxxxxx)
Date: Thu Jan 11 2001 - 16:23:44 GMT-3
Excuse my ignorance but according to
<http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#43> ATM
LANE is no longer in the Lab Exam. Although I can see that only ATM LANE is
explicitly mentioned I also note from the equipment list that no ATM switch
(LS1010) is included. Hence whey the ATM questions?
Am I missing something?
TIA
Patrick Bikar wrote:
> Justin,
>
> Thanks for the clear answer.
>
> Does it acctually mean that configuring SVCs on an LS1010 is simpler than
> configuring PVCs ?
>
> Don't you need to specify the atm-nsap prefix of the switch ?
>
> Do you know what is configured by default (ilmi, qsaal, ...) ?
>
> Thanks for any hints !
> Patrick.
>
> At 22:09 11/01/2001 +1300, Justin Menga wrote:
> >Hi,
> >
> >All you need to do is start with a default configuration, 'no shut' on the
> >ATM access ports. You can do SVCs now.
> >
> >Then to add a PVC, on either of the PVC interfaces (not both as you do for
> >frame relay) configure:
> >
> >int atm1/0/0
> > desc Connected to R1
> > atm pvc 0 100 int atm1/0/1 0 200
> >
> >int atm1/0/1
> > desc COnnected to R2
> >
> >R1 ---------- LS1010 --------- R2
> > (0/100) (0/200)
> >
> >
> >Regards,
> >
> >Justin Menga CCIE #6640 MCSE+I CCSE
> >WAN Specialist
> >Computerland New Zealand
> >PO Box 3631, Auckland
> >DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> >mailto: justin.menga@computerland.co.nz
> >
> >
> >
> >-----Original Message-----
> >From: Patrick Bikar [mailto:pbikar@cisco.com]
> >Sent: Thursday, January 11, 2001 9:36 PM
> >To: ccielab@groupstudy.com
> >Subject: Simple LS1010 config
> >
> >
> >Hi all !
> >
> >Could anyone send me a simple LS1010 config in order to be able to set up
> >PVCs and SVCs between 2 routers with atm interfaces ? The configs of the
> >routers are welcome also if possible.
> >
> >Thanks !
> >Patrick.
> >
> >
> >Patrick.
> >CCNP, Belgium.
> >Lab:15/03/2001
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:27 GMT-3