From: YJC (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Wed Jan 10 2001 - 00:10:10 GMT-3
dear all,
Thank you all, but I can't solved it,
about question 1,I have used no network 1111 in rip and ipx nlsp rip off and
ipx nlsp sap off,
but I have saw N 1111. why, what is function of area address.
about question 2,I used command access-list 1200 deny 123400 FFFFFF00
access-list 1200 permit -1,but it can't work. why?
----- Original Message -----
From: Justin Menga <Justin.Menga@computerland.co.nz>
To: 'YJC' <stiff.yu@datacraft-asia.com>; CCIE Group Study (E-mail)
<ccielab@groupstudy.com>
Sent: Wednesday, January 10, 2001 4:05 AM
Subject: RE: ipx nlsp
> 1. I have found all local IPX interfaces on an NLSP router are advertised
> via NLSP as N routes, even if they are not in the area.
> 2. You need to use deny statement, meaning deny explicit routes for the
> range specified, then a permit -1 after (meaning allow any other explicit
> routes).
>
> Regards,
>
> Justin Menga CCIE #6640 MCSE+I CCSE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
>
> -----Original Message-----
> From: YJC [mailto:stiff.yu@datacraft-asia.com]
> Sent: Tuesday, 9 January 2001 10:18 p.m.
> To: CCIE Group Study (E-mail)
> Subject: ipx nlsp
>
>
> hellow all,
>
> I 'm learning ipx nlsp,but i have many question.
> 1,how does area-address work?
> I use arae-address 123400 ffffff00,int loop 0 is network 123450
> int loop 1 is network 123460,int loop 2 is network 1111,disable rip
> all of interface, why will nlsp declare route for network 1111.
>
> 2, route-aggregation,
> I use route-aggregation in router nlsp,
> and access-list 1200 permit 123400 FFFFFF00,
> why I can't see summary route in routing table.
> who can give me work configration for nlsp.
>
> Thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3