From: Michelle T (mtruman@xxxxxxxxxxxxxxx)
Date: Tue Jan 09 2001 - 15:01:12 GMT-3
Padhu,
You can set up tunnels across the WAN and run ipxwan on the tunnels.
Michelle
----- Original Message -----
From: "Padhu (LFG)" <padhu@steinroe.com>
To: "'Connary, Julie Ann'" <jconnary@cisco.com>; "YJC"
<stiff.yu@datacraft-asia.com>
Cc: "CCIE Group Study (E-mail)" <ccielab@groupstudy.com>
Sent: Tuesday, January 09, 2001 11:18 AM
Subject: RE: ipx nlsp - discontiguos areas
> Just started some work on NLSP last nite ..so some more silly questions
> after reading the
> cisco IPX config guides....I have NLSP running on the lan with area
xxxxxxxx
> , IPX eigrp over frame,remote spoke lan running NLSP xxxx ..(Unfortunately
> this version doesn't support Aggregation-Diff problem for another day)....
>
> How do i connect the 2 NLSP areas without redistributing between EIGRP /
> NLSP ? any concept similar to virtual links... ?
>
> I can tell u ...IPX addresses ....whoever came up with that scheme had way
> too many beers ..
>
> appreciate any insight.
>
> Cheers,Padhu
>
> -----Original Message-----
> From: Connary, Julie Ann [mailto:jconnary@cisco.com]
> Sent: Tuesday, January 09, 2001 7:26 AM
> To: YJC
> Cc: CCIE Group Study (E-mail)
> Subject: Re: ipx nlsp
>
>
> YJC,
>
> Reading Caslow it says that "automatic mutual redistribution occurs
between
> EIGRP and RIP and also between
> RIP and NLSP"
>
> Did you enter under ipx router rip, no network 1111 ?
>
> What does your route table look like? ARe you seeing 1111 in your NLSP
> database?
>
> Julie Ann
> At 05:18 PM 1/9/2001 +0800, YJC wrote:
> >hellow all,
> >
> >I 'm learning ipx nlsp,but i have many question.
> >1,how does area-address work?
> > I use arae-address 123400 ffffff00,int loop 0 is network 123450
> > int loop 1 is network 123460,int loop 2 is network 1111,disable rip
> > all of interface, why will nlsp declare route for network 1111.
> >
> >2, route-aggregation,
> > I use route-aggregation in router nlsp,
> > and access-list 1200 permit 123400 FFFFFF00,
> > why I can't see summary route in routing table.
> >who can give me work configration for nlsp.
> >
> >Thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3