From: Robert DeVito (robertdevito@xxxxxxxxxxx)
Date: Tue Jan 09 2001 - 17:50:00 GMT-3
I plan on working on ATM next week. Do you need the neighbor command in
EIGRP?
Robert
----Original Message Follows----
From: Jack Yu <cciecn@yahoo.com>
Reply-To: Jack Yu <cciecn@yahoo.com>
To: Allyn Baskerville <abaskerville@ibeam.com>, "'Simon Baxter'"
<Simon.Baxter@au.logical.com>, ccielab@groupstudy.com
Subject: RE: EIGRP over ATM
Date: Tue, 9 Jan 2001 08:09:21 -0800 (PST)
Simon,
How about taking off the neighbor command from the
eigrp config?
Good Luck
Jack
--- Allyn Baskerville <abaskerville@ibeam.com> wrote:
> I just gave this a shot, but still no success.
> Thanks for the response,
> though. Allyn
>
> -----Original Message-----
> From: Simon Baxter
> [mailto:Simon.Baxter@au.logical.com]
> Sent: Thursday, January 04, 2001 1:08 AM
> To: Allyn Baskerville; ccielab@groupstudy.com
> Subject: RE: EIGRP over ATM
>
>
> Use : "protocol ip 172.32.1.15 broadcast"
>
> -----Original Message-----
> From: Allyn Baskerville
> [mailto:abaskerville@ibeam.com]
> Sent: Thursday, January 04, 2001 3:33 PM
> To: ccielab@groupstudy.com
> Subject: EIGRP over ATM
>
>
> I ran into a problem today that I can't seem to
> resolve. I am experiencing
> a problem with EIGRP neighbors staying up over an
> ATM link when using either
> PVCs, SVCs or classical IP. The symptoms are exactly
> the same for all of
> these. However, I'm not having problems with other
> routing protocols. The
> neighbors will come up for 5 seconds, go down for 5
> seconds. I do see
> hellos on both routers, though:
>
> 01:31:58: EIGRP: Sending HELLO on ATM3/0 nbr
> 172.32.1.15
> 01:31:58: AS 10, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ
> un/rely 0/0
> 01:31:59: EIGRP: Received HELLO on ATM3/0 nbr
> 172.32.1.15
> 01:31:59: AS 10, Flags 0x0, Seq 0/0 idbQ 0/0
> 01:32:03: EIGRP: Sending HELLO on ATM3/0 nbr
> 172.32.1.15
>
> The routers are running 12.0.7T, and I reloaded them
> and the ATM switch a
> couple of times. Do any of you have an idea that I
> might try? Incidentally,
> both routers (at least for the PVC configuration)
> are configured as follows,
> only the IP and PVC information is changed between
> the two:
>
> interface ATM3/0
> bandwidth 155000
> ip address 172.32.1.16 255.255.255.0
> ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> no atm ilmi-keepalive
> pvc toR15 1/116
> protocol ip 172.32.1.15
> broadcast
>
> router eigrp 10
> network 172.22.0.0
> network 172.32.0.0
> neighbor 172.32.1.15 ATM3/0
> no auto-summary
>
>
> Thanks - Allyn
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:25 GMT-3