From: Gene Park (gpark_56@xxxxxxxxx)
Date: Sat Jan 06 2001 - 14:34:33 GMT-3
Dear Members:
Ive given following hardware to set up CCIE lab for a group of people. So Im l
ooking for tips
for topology. Any ideas would be appreciated. And I have some questions.
1. With the routers provided, I dont think I can make frame relay switch.
My guess is that I have
to insert 4-port serial network module in an available slot on 3600. Am I right
or any other
suggestions?
2. In ATM module, what do I have to plug into ATM0? Is it an ATM switch or
some other gear to have
practices? Im not sure on this. I heard that ATM LANE is no longer tested in th
e lab.
3. For the voice, 2 channel voice module is installed. I think two phones
are required. What else
do I need? I never had practice on the VOIP. Please help.
2 of 2503
2 of 2513
4 of 2514
1 of 2509
2 of 3600(3 modules in there)
2-channel voice network(voice 2v)
ATM IA-OC3MM
FastEthernet 1 FE-TX
1 of 2900XL Cat
1 of MAU
Thank you for your help.
Gene
gpark_56@yahoo.com
=====
Gene Park
gpark_56@yahoo.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:23 GMT-3