From: Nnanna Obuba (obuba@xxxxxxxxxxxxxxxx)
Date: Fri Dec 29 2000 - 07:35:50 GMT-3
I think it's rather dangerous to assume you'll only be required to configure
vlans on the 3920..taking out a few hours to learn a little more about the
device can surely do no harm.
Nnanna Obuba, CCIE # 6586
www.nantech.com
Online lab for CCIE Preparation
----- Original Message -----
From: "YJC" <stiff.yu@datacraft-asia.com>
To: "Earl Aboytes" <Earl@dnssystems.com>; "'Kevin Baumgartner'"
<kbaumgar@cisco.com>; "Wang, Roger" <Roger@inteqnet.com>;
<ccielab@groupstudy.com>
Sent: Friday, December 29, 2000 3:30 AM
Subject: Re: 3920 Switch
> Aboyte,
>
> I think you are right,but I think we must config two CRF and TWo BRF,
> two CRF in different BRF,do you think right
> ----- Original Message -----
> From: Earl Aboytes <Earl@dnssystems.com>
> To: 'Kevin Baumgartner' <kbaumgar@cisco.com>; Wang, Roger
> <Roger@inteqnet.com>; <ccielab@groupstudy.com>
> Sent: Friday, December 29, 2000 1:42 AM
> Subject: RE: 3920 Switch
>
>
> > I agree with Kevin. Know what a BRF and a CRF is and how to configure
> them
> > on the 3920. Don't assume that you will have only one vlan for token
> ring.
> > That assumption could have disastrous results.
> > Earl Aboytes, CCIE 6097
> >
> > -----Original Message-----
> > From: Kevin Baumgartner [mailto:kbaumgar@cisco.com]
> > Sent: Thursday, December 28, 2000 9:28 AM
> > To: Wang, Roger; ccielab@groupstudy.com
> > Subject: RE: 3920 Switch
> >
> > That's not a good assumption. You should now how to configure VLANs (BRF
> > and CRF) and
> > also how to change the port duplex.
> >
> > Kevin
> >
> > At 11:06 AM 12/28/00 -0500, Wang, Roger wrote:
> > >I have been thinking about whether to configure the switch or not
during
> > the
> > >exam... if it's asked, sure, but I don't see the reason why we can't
> just
> > >plug in the cables and go, except maybe making sure the speed/duplex
> > setting
> > >are correct. I know all ports fall into a default VLAN, just like on
the
> > >Ethernet switches, so they should just work with minimal configuration.
> > >What do you all think?
> > >
> > >Thanks,
> > >
> > >Rog
> > >
> > > > -----Original Message-----
> > > > From: Dave [mailto:cisco_instructor@genton.com]
> > > > Sent: Thursday, December 28, 2000 10:48 AM
> > > > To: Ronnie Royston; SherefMohamed@cdh.org; Santarsiero, Bill
> > > > Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> > > > Subject: Re: 3920 Switch
> > > >
> > > >
> > > > You must configure a BRF, and one or more CRF's depending on
> > > > your topology.
> > > > Then you must associate your physical ports to the
> > > > appropriate CRf's, and of
> > > > course move the CRF's in the correct BRF.
> > > >
> > > > dAve
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Ronnie Royston" <RonnieR@globaldatasys.com>
> > > > To: <SherefMohamed@cdh.org>; "Santarsiero, Bill"
> > > > <BSantarsiero@greenwichtech.com>
> > > > Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
> > > > Sent: Thursday, December 28, 2000 10:40 AM
> > > > Subject: RE: 3920 Switch
> > > >
> > > >
> > > > > That is not true. Don't sweat the 3920 switch. There is
> > > > configuration
> > > > > information on your DocCD. Read that beforehand. The most
> > > > you'll be
> > > > > configuring is vlans, I believe.
> > > > >
> > > > > -----Original Message-----
> > > > > From: SherefMohamed@cdh.org [mailto:SherefMohamed@cdh.org]
> > > > > Sent: Thursday, December 28, 2000 7:27 AM
> > > > > To: Santarsiero, Bill
> > > > > Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> > > > > Subject: Re: 3920 Switch
> > > > >
> > > > >
> > > > >
> > > > > You are responsbile of configring everything in your rack !
> > > > > If you don't know how to do it, you will fail misrebly .
> > > > >
> > > > > Good luck
> > > > > Sheref
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > "Santarsiero, Bill"
> > > > >
> > > > > <BSantarsiero@greenwic To:
> > > > > ccielab@groupstudy.com
> > > > > htech.com> cc:
> > > > >
> > > > > Sent by: Subject:
> > > > 3920 Switch
> > > > >
> > > > > nobody@groupstudy.com
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > 12/28/2000 07:57 AM
> > > > >
> > > > > Please respond to
> > > > >
> > > > > "Santarsiero, Bill"
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > All,
> > > > >
> > > > > I know the 3920 is on the equipment list, but is it
> > > > configured for you in
> > > > > RTP, or is this fair game for configuration. I just want to know
if
> > > > > someone
> > > > > has had to configure it.
> > > > >
> > > > > Thanks in advance,
> > > > > Bill
> > > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3