From: Ellington, Chris, BmS - NMI-CK (Chris.Ellington@xxxxxxxxx)
Date: Fri Dec 29 2000 - 10:47:50 GMT-3
What is the thinking if you have two rings (say ring 10 and ring 20) - I
suppose
it is best to configure two different CRFs and two different BRFs, right?
chris
-----Original Message-----
From: Rob Webber [mailto:rwebber@callisma.com]
Sent: Thursday, December 28, 2000 11:31 AM
To: ccielab@groupstudy.com
Subject: RE: 3920 Switch
I definitely agree with your VLAN assessment - unless multiple VLANs are
required, just use the default one.
My plan (as you alluded) is to set the speed, duplex and mode (port or
station) on every port that I use. It is quite easy to do and the last thing
I want is to be questioning my Layer 1 stability. My experience with TR
autosense (with any product) has not been that good.
Rob.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Wang, Roger
Sent: Thursday, December 28, 2000 11:07 AM
To: ccielab@groupstudy.com
Subject: RE: 3920 Switch
I have been thinking about whether to configure the switch or not during the
exam... if it's asked, sure, but I don't see the reason why we can't just
plug in the cables and go, except maybe making sure the speed/duplex setting
are correct. I know all ports fall into a default VLAN, just like on the
Ethernet switches, so they should just work with minimal configuration.
What do you all think?
Thanks,
Rog
> -----Original Message-----
> From: Dave [mailto:cisco_instructor@genton.com]
> Sent: Thursday, December 28, 2000 10:48 AM
> To: Ronnie Royston; SherefMohamed@cdh.org; Santarsiero, Bill
> Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> Subject: Re: 3920 Switch
>
>
> You must configure a BRF, and one or more CRF's depending on
> your topology.
> Then you must associate your physical ports to the
> appropriate CRf's, and of
> course move the CRF's in the correct BRF.
>
> dAve
>
>
> ----- Original Message -----
> From: "Ronnie Royston" <RonnieR@globaldatasys.com>
> To: <SherefMohamed@cdh.org>; "Santarsiero, Bill"
> <BSantarsiero@greenwichtech.com>
> Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
> Sent: Thursday, December 28, 2000 10:40 AM
> Subject: RE: 3920 Switch
>
>
> > That is not true. Don't sweat the 3920 switch. There is
> configuration
> > information on your DocCD. Read that beforehand. The most
> you'll be
> > configuring is vlans, I believe.
> >
> > -----Original Message-----
> > From: SherefMohamed@cdh.org [mailto:SherefMohamed@cdh.org]
> > Sent: Thursday, December 28, 2000 7:27 AM
> > To: Santarsiero, Bill
> > Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> > Subject: Re: 3920 Switch
> >
> >
> >
> > You are responsbile of configring everything in your rack !
> > If you don't know how to do it, you will fail misrebly .
> >
> > Good luck
> > Sheref
> >
> >
> >
> >
> >
> > "Santarsiero, Bill"
> >
> > <BSantarsiero@greenwic To:
> > ccielab@groupstudy.com
> > htech.com> cc:
> >
> > Sent by: Subject:
> 3920 Switch
> >
> > nobody@groupstudy.com
> >
> >
> >
> >
> >
> > 12/28/2000 07:57 AM
> >
> > Please respond to
> >
> > "Santarsiero, Bill"
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > All,
> >
> > I know the 3920 is on the equipment list, but is it
> configured for you in
> > RTP, or is this fair game for configuration. I just want to know if
> > someone
> > has had to configure it.
> >
> > Thanks in advance,
> > Bill
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3