From: Bernard Dunn (dunn@xxxxxxxxx)
Date: Thu Dec 28 2000 - 19:26:31 GMT-3
LB,
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
Regards
Bernard.
On Thu, 28 Dec 2000, Lye Beng, Ong wrote:
> Hi all,
>
> I am trying to configure IRB. I have a NT workstation connected to the
> bridge interface (e2/2). The workstation ip address is 12.0.0.5/8.
> When I try to ping from the router to the w/s I got the following
> error (deb arp). I can see that the icmp packet reach the w/s and the
> w/s tries to arp for the ip address 12.0.0.1, but it never got any
> reply.
>
> What should be the w/s default gateway setting ?
>
> Plese help. Thanks.
>
> Regards,
> -- LB
>
> 3w0d: IP ARP: creating incomplete entry for IP address: 12.0.0.5 interface BV
I1
> 3w0d: IP ARP: sent req src 12.0.0.1 0030.94a3.aea2,
> dst 12.0.0.5 0000.0000.0000 BVI1
> 3w0d: IP ARP rep filtered src 12.0.0.5 00c0.4f60.3d20, dst 12.0.0.1 0030.94a3
.aea2 wrong cable, interface Ethernet2/2.
> 3w0d: IP ARP: sent req src 12.0.0.1 0030.94a3.aea2,
> dst 12.0.0.5 0000.0000.0000 BVI1
>
> below is my partial configuration. I am running 12.0(7)T.
> bridge irb
>
> interface Ethernet2/0
> ip address 10.0.0.1 255.0.0.0
> no ip directed-broadcast
> no keepalive
> !
> interface Ethernet2/1
> ip address 11.0.0.1 255.0.0.0
> no ip directed-broadcast
> no keepalive
> !
> interface Ethernet2/2
> no ip address
> ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> bridge-group 1
>
> interface BVI1
> ip address 12.0.0.1 255.0.0.0
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:12 GMT-3