From: Raymond May (raymay30@xxxxxxxxxxx)
Date: Thu Dec 28 2000 - 17:18:03 GMT-3
If they will all be in the same area you can configure one network
statement.
network 192.168.16.0 0.0.0.31 area X.X.X.X
Brgds,
Ray May
>From: "fwells12" <fwells12@hotmail.com>
>Reply-To: "fwells12" <fwells12@hotmail.com>
>To: <ccielab@groupstudy.com>
>Subject: OSPF network statement
>Date: Thu, 28 Dec 2000 11:17:32 -0800
>
>I have the following IP addresses configured as loopback interfaces on =
>an OSPF router. What is the correct command to insert these networks =
>into the OSPF process in the most efficient manner? By that, I mean =
>conserving the maximum amount of IP addresses.
>
>interface Loopback0
> ip address 192.168.20.2 255.255.248.0
>!
>interface Loopback1
> ip address 192.168.28.2 255.255.248.0
>!
>interface Loopback2
> ip address 192.168.36.2 255.255.248.0
>!
>interface Loopback3
> ip address 192.168.44.2 255.255.248.0=20
>
>Cheers.
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:12 GMT-3