From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Thu Dec 28 2000 - 14:27:51 GMT-3
That's not a good assumption. You should now how to configure VLANs (BRF
and CRF) and
also how to change the port duplex.
Kevin
At 11:06 AM 12/28/00 -0500, Wang, Roger wrote:
>I have been thinking about whether to configure the switch or not during the
>exam... if it's asked, sure, but I don't see the reason why we can't just
>plug in the cables and go, except maybe making sure the speed/duplex setting
>are correct. I know all ports fall into a default VLAN, just like on the
>Ethernet switches, so they should just work with minimal configuration.
>What do you all think?
>
>Thanks,
>
>Rog
>
> > -----Original Message-----
> > From: Dave [mailto:cisco_instructor@genton.com]
> > Sent: Thursday, December 28, 2000 10:48 AM
> > To: Ronnie Royston; SherefMohamed@cdh.org; Santarsiero, Bill
> > Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> > Subject: Re: 3920 Switch
> >
> >
> > You must configure a BRF, and one or more CRF's depending on
> > your topology.
> > Then you must associate your physical ports to the
> > appropriate CRf's, and of
> > course move the CRF's in the correct BRF.
> >
> > dAve
> >
> >
> > ----- Original Message -----
> > From: "Ronnie Royston" <RonnieR@globaldatasys.com>
> > To: <SherefMohamed@cdh.org>; "Santarsiero, Bill"
> > <BSantarsiero@greenwichtech.com>
> > Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
> > Sent: Thursday, December 28, 2000 10:40 AM
> > Subject: RE: 3920 Switch
> >
> >
> > > That is not true. Don't sweat the 3920 switch. There is
> > configuration
> > > information on your DocCD. Read that beforehand. The most
> > you'll be
> > > configuring is vlans, I believe.
> > >
> > > -----Original Message-----
> > > From: SherefMohamed@cdh.org [mailto:SherefMohamed@cdh.org]
> > > Sent: Thursday, December 28, 2000 7:27 AM
> > > To: Santarsiero, Bill
> > > Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> > > Subject: Re: 3920 Switch
> > >
> > >
> > >
> > > You are responsbile of configring everything in your rack !
> > > If you don't know how to do it, you will fail misrebly .
> > >
> > > Good luck
> > > Sheref
> > >
> > >
> > >
> > >
> > >
> > > "Santarsiero, Bill"
> > >
> > > <BSantarsiero@greenwic To:
> > > ccielab@groupstudy.com
> > > htech.com> cc:
> > >
> > > Sent by: Subject:
> > 3920 Switch
> > >
> > > nobody@groupstudy.com
> > >
> > >
> > >
> > >
> > >
> > > 12/28/2000 07:57 AM
> > >
> > > Please respond to
> > >
> > > "Santarsiero, Bill"
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > All,
> > >
> > > I know the 3920 is on the equipment list, but is it
> > configured for you in
> > > RTP, or is this fair game for configuration. I just want to know if
> > > someone
> > > has had to configure it.
> > >
> > > Thanks in advance,
> > > Bill
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3