From: Kevin Baumgartner (kbaumgar@xxxxxxxxx)
Date: Thu Dec 28 2000 - 14:25:29 GMT-3
Is 12.1 what is going to be in the lab now? If so yes VoFR is supported the
2600.
Here is a short configuration I played with,
The key thing is to define class and map-class and to set the frame-relay
voice bandwidth.
If you don't define this bandwidth no calls will be made. The frame-relay
voice bandwidth
defaults to 0.
- Kevin
R1 --------------FR ---------------------- R2
1111 DLCI 100 2222
R1
------
dial-peer voice 100 vofr
destination-pattern 2222
session target Serial0/0 100
!
interface Serial0/0
encapsulation frame-relay
frame-relay interface-dlci 100
class vofr
vofr cisco
!
map-class frame-relay vofr
frame-relay voice bandwidth 32000
R2
-----
dial-peer voice 100 vofr
destination-pattern 1111
session target Serial0/0 100
!
interface Serial0/0
encapsulation frame-relay
frame-relay interface-dlci 100
class vofr
vofr cisco
!
map-class frame-relay vofr
frame-relay voice bandwidth 32000
At 10:36 AM 12/28/00 -0600, Jarrod Mills wrote:
>Finishing uo last minute studying and was looking at 2nd edition of =
>Caslow's book and a question came to me. Is VOFR on a 2600 supported in =
>only 12.1? If so, how much should I concern myself with it for the =
>lab.
>
>thanks
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3