From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Wed Dec 27 2000 - 23:19:29 GMT-3
not use point-to-multipoint ,any other solution will works!
----- Original Message -----
From: fwells12 <fwells12@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 28, 2000 7:00 AM
Subject: Re: ospf point-to-multipoint networks and the /32 route
> Search the CCIE Lab archives for threads on cciebootcamp scenarios, I do
> recall reading a solution to your problem, unfortunately I cannot remember
> what is was, or where is was! Good hunting.
>
>
> ----- Original Message -----
> From: Connary, Julie Ann <jconnary@cisco.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, December 27, 2000 12:01 PM
> Subject: ospf point-to-multipoint networks and the /32 route
>
>
> > Hi all,
> >
> > how do you get ospf to not advertise a /32 network for a
> > point-to-multipoint network. In the
> > ospf database on another router when I issue "show ip ospf database
> router"
> > I see the following:
> >
> > Link connected to: a Stub Network
> > (Link ID) Network/subnet number: 150.100.32.2
> > (Link Data) Network Mask: 255.255.255.255
> > Number of TOS metrics: 0
> > TOS 0 Metrics: 0
> >
> > Why does ospf see the point-to-multipoint frame-relay network as a stub?
> >
> > Thanks in advance,
> >
> > Julie Ann
> > ------------------------------------------------------------------------
> > Julie Ann Connary
> > | | Network Consulting Engineer
> > ||| ||| Federal Support Program
> > .|||||. .|||||. 13635 Dulles Technology Drive,
> > Herndon VA 20171
> > .:|||||||||:.:|||||||||:. Pager: 1-888-642-0551
> > c i s c o S y s t e m s Email: jconnary@cisco.com
> >
> > ------------------------------------------------------------------------
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3