From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Wed Dec 27 2000 - 20:00:59 GMT-3
Search the CCIE Lab archives for threads on cciebootcamp scenarios, I do
recall reading a solution to your problem, unfortunately I cannot remember
what is was, or where is was! Good hunting.
----- Original Message -----
From: Connary, Julie Ann <jconnary@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, December 27, 2000 12:01 PM
Subject: ospf point-to-multipoint networks and the /32 route
> Hi all,
>
> how do you get ospf to not advertise a /32 network for a
> point-to-multipoint network. In the
> ospf database on another router when I issue "show ip ospf database
router"
> I see the following:
>
> Link connected to: a Stub Network
> (Link ID) Network/subnet number: 150.100.32.2
> (Link Data) Network Mask: 255.255.255.255
> Number of TOS metrics: 0
> TOS 0 Metrics: 0
>
> Why does ospf see the point-to-multipoint frame-relay network as a stub?
>
> Thanks in advance,
>
> Julie Ann
> ------------------------------------------------------------------------
> Julie Ann Connary
> | | Network Consulting Engineer
> ||| ||| Federal Support Program
> .|||||. .|||||. 13635 Dulles Technology Drive,
> Herndon VA 20171
> .:|||||||||:.:|||||||||:. Pager: 1-888-642-0551
> c i s c o S y s t e m s Email: jconnary@cisco.com
>
> ------------------------------------------------------------------------
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:11 GMT-3