From: Bernard Dunn (dunn@xxxxxxxxx)
Date: Tue Dec 26 2000 - 05:49:44 GMT-3
Charles,
This is your reason:
> Dec 25 14:14:49.906: DDR: network 156.43.201.0/255.255.255.0 UP,
> Dec 25 14:14:49.910: DDR: primary DOWN
> Dec 25 14:14:49.910: DDR: Dialer Watch: Dial Reason: Secondary of group
2 DOWN
> Dec 25 14:14:49.914: DDR: Dialer Watch: watch-group = 2,
> Dec 25 14:14:49.914: DDR: dialing secondary by dialer map
156.43.201.0 on BR0
So your second 'dialer map' statement is what's bringing the link up
again. Have you tried removing the second 'dialer map' statement?
Regards
Bernard.
On Mon, 25 Dec 2000, Johnson, Charles wrote:
> No auto-summary made no difference. It still drops the call and redials ever
y 90 seconds. Thanks for the idea, though.
>
> Charles
>
> -----Original Message-----
> From: Claude-Vincent [mailto:claude_vincent@yahoo.com]
> Sent: Monday, December 25, 2000 8:04 PM
> To: Johnson, Charles; ccielab@groupstudy.com
> Subject: Re: dialer watch idle time out
>
>
> Why don't you try with a 'no auto-summary' command in your router eigrp 46?
>
> Vincent
>
> ----- Original Message -----
> From: "Johnson, Charles" <Charles.Johnson@turner.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, December 26, 2000 6:02 AM
> Subject: dialer watch idle time out
>
>
> > Anyone used dialer watch much?
> >
> > I got it to work with OSPF & EIGRP with 2500s running 12.0(9). It looks
> like it has an idle timeout of 90 seconds. At the end of the 90 seconds, it
> does something. If the primary link comes up during the 90 seconds and
> stays up, the dial session will drop at the end of the 90 seconds.
> >
> > If the primary is down at the 90 second mark, the dial session still
> drops, but redials immediately. Is this the common/expected behavior?
> >
> > Here is debug dialer from the router with dialer watch:
> >
> > Dec 25 14:14:49.862: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected
> from 827
> > 99 r4, call lasted 89 seconds
> > Dec 25 14:14:49.866: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
> down
> > Dec 25 14:14:49.902: BR0:1 DDR: Dialer Watch: resetting call in progress
> > Dec 25 14:14:49.902: DDR: Dialer Watch: watch-group = 2
> > Dec 25 14:14:49.902: DDR: network 156.43.41.0/255.255.255.0 DOWN,
> > Dec 25 14:14:49.906: DDR: network 156.43.201.0/255.255.255.0 UP,
> > Dec 25 14:14:49.910: DDR: primary DOWN
> > Dec 25 14:14:49.910: DDR: Dialer Watch: Dial Reason: Secondary of group 2
> DOWN
> > Dec 25 14:14:49.914: DDR: Dialer Watch: watch-group = 2,
> > Dec 25 14:14:49.914: DDR: dialing secondary by dialer map
> 156.43.201.0 o
> > n BR0
> > Dec 25 14:14:49.918: BR0 DDR: Attempting to dial 82799
> > Dec 25 14:14:49.922: BR0:1 DDR: disconnecting call
> > Dec 25 14:14:50.866: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> BRI0:1, cha
> > nged state to down
> > Dec 25 14:14:53.290: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> > Dec 25 14:14:53.322: BR0:1 DDR: Dialer Watch: resetting call in progress
> > Dec 25 14:14:53.330: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
> 82799
> >
> > Dec 25 14:14:53.386: BR0:1 DDR: dialer protocol up
> >
> >
> > Here is the config from the EIGRP attempt:
> >
> > Current configuration:
> > !
> > ! Last configuration change at 15:59:51 UTC Mon Dec 25 2000
> > ! NVRAM config last updated at 14:01:31 UTC Mon Dec 25 2000
> > !
> > version 12.0
> > service timestamps debug datetime msec
> > service timestamps log datetime msec
> > no service password-encryption
> > !
> > hostname r6
> > !
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > isdn switch-type basic-ni
> > !
> > !
> > !
> > interface Loopback0
> > ip address 156.43.43.5 255.255.255.0
> > no ip directed-broadcast
> > ip ospf interface-retry 0
> > !
> > interface Ethernet0
> > ip address 156.43.200.2 255.255.255.0
> > no ip directed-broadcast
> > ip ospf interface-retry 0
> > no keepalive
> > !
> > interface Serial0
> > ip address 156.43.42.6 255.255.255.0
> > no ip directed-broadcast
> > ip ospf interface-retry 0
> > no ip mroute-cache
> > no fair-queue
> > clockrate 250000
> > !
> > interface Serial1
> > no ip address
> > no ip directed-broadcast
> > !
> > interface Serial2
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > !
> > interface Serial3
> > no ip address
> > no ip directed-broadcast
> > shutdown
> > !
> > interface BRI0
> > ip address 156.43.128.6 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 300
> > dialer map ip 156.43.128.4 name r4 broadcast 82799
> > dialer map ip 156.43.201.0 name r4 82799
> > dialer watch-group 2
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 404827297400 72974
> > isdn spid2 404827392601 73926
> > !
> > router eigrp 46
> > network 156.43.0.0
> > !
> > ip classless
> > !
> > access-list 100 deny eigrp any any
> > access-list 100 deny ip any host 224.0.0.5
> > access-list 100 permit ip any any
> > dialer watch-list 2 ip 156.43.41.0 255.255.255.0
> > dialer watch-list 2 ip 156.43.201.0 255.255.255.0
> > dialer-list 1 protocol ip list 100
> > !
> > line con 0
> > privilege level 15
> > transport input none
> > line aux 0
> > line vty 0 4
> > !
> > end
> >
> > r6#
> >
> >
> > thanks,
> > Charles
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:10 GMT-3