From: Sorin Suru (sorin3177@xxxxxxxxxxx)
Date: Mon Dec 25 2000 - 20:59:22 GMT-3
Thank you for your help Ray. Please pardon my ignorance, but my English is
not so good and maybe I didn't understand very well task#3. In my
understanding you don't have to use policy routing if it weren't for step 11
of task #3. Is that correct? Thank you kindly.
Sorin
>From: "Raymond May" <raymay30@hotmail.com>
>Reply-To: "Raymond May" <raymay30@hotmail.com>
>To: sorin3177@hotmail.com, ccielab@groupstudy.com
>Subject: Re: Lab1 Question!
>Date: Sun, 24 Dec 2000 18:09:30 -0000
>
>Sorin,
> I have done this Boot Camp lab and had no problems summarizing the
>loopbacks. As per diagram Area 44 is connected to R4 which is only has
>interfaces in Area 3. Therefore you must create virtual-link between Area
>44
>and Backbone.
>
>Best Regards,
>
>Ray May
>
> >From: "Sorin Suru" <sorin3177@hotmail.com>
> >Reply-To: "Sorin Suru" <sorin3177@hotmail.com>
> >To: ccielab@groupstudy.com
> >Subject: Lab1 Question!
> >Date: Sun, 24 Dec 2000 05:43:18 -0000
> >
> >I m working on Lab1(bootcamp), my Question is regarding Task3.7 Summarize
> >the 2 loopback subnets so they appear as one route to the rest of the
>OSPF
> >routers.
> >To accomplish this OSPF area range command is used to summarize routes
>from
> >non-backbone areas into area 0 or for external routes(ASBR) the summary
> >address will be used, please tell me why this theory doesn't apply to
>this
> >lab(I tried and doesn't work).
> >
> >From the HInts/LAB1 I understand that I need to use policy routing...any
> >ideas? Is there a uRL with a detail explanation of these labs? Thank you
> >and
> >Happy Holidays.
> >Sorin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:10 GMT-3