From: Johnny Gorham (jgorham@xxxxxxxxx)
Date: Wed Dec 20 2000 - 12:57:00 GMT-3
You only need a nsap address if you are running lane or soft-pvc.
"Connary, Julie Ann" wrote:
> So how else does the router know what
> his nsap address is? Maybe he doesn't need an nsap address if it's just a
> hard set pvc?
> Never tried that.
>
> At 09:51 AM 12/20/2000 -0500, Yurchenko, Michael wrote:
> >And why do we care about prefixes if all he does is basic pvcs?
> >
> >-----Original Message-----
> >From: Connary, Julie Ann [mailto:jconnary@cisco.com]
> >Sent: Wednesday, December 20, 2000 9:48 AM
> >To: ShahzaD Ali
> >Cc: Yurchenko, Michael; 'Steve Clubb'; ccielab@groupstudy.com
> >Subject: RE: ATM Pvc
> >
> >
> >That depends on how you want the local router to get
> >his nsap prefix.
> >
> >
> >Julie Ann
> >
> >At 09:12 PM 12/19/2000 -0800, ShahzaD Ali wrote:
> > >and I think you dont need
> > >
> > >atm pvc 2 0 16 ilmi on both the routers.
> > >
> > >Regards,
> > >
> > >ShahzaD
> > >
> > >
> > >
> > >-----Original Message-----
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > >Yurchenko, Michael
> > >Sent: Tuesday, December 19, 2000 11:37 AM
> > >To: 'Steve Clubb'; 'ccielab@groupstudy.com'
> > >Subject: RE: ATM Pvc
> > >
> > >
> > >Map-group on r7
> > >
> > >-----Original Message-----
> > >From: Steve Clubb [mailto:sclubb@cattech.com]
> > >Sent: Tuesday, December 19, 2000 2:30 PM
> > >To: 'ccielab@groupstudy.com'
> > >Subject: ATM Pvc
> > >
> > >
> > >I can't seem to get connectivity. Can anyone see why?
> > >
> > >
> > >r8 - - - - - - LS1010 - - - - - - - -r7
> > >
> > >
> > >r8
> > >interface ATM1/0
> > > ip address 20.20.20.1 255.255.255.0
> > > no ip directed-broadcast
> > > map-group cisco
> > > atm pvc 1 5 45 aal5snap
> > > atm pvc 2 0 16 ilmi
> > > no atm ilmi-keepalive
> > >!
> > >map-list cisco
> > > ip 20.20.20.2 atm-vc 1 broadcast
> > >
> > >
> > >LS1010
> > >interface ATM0/0/0
> > > no ip address
> > > no ip directed-broadcast
> > > no atm ilmi-keepalive
> > >!
> > >interface ATM0/0/1
> > > no ip address
> > > no ip directed-broadcast
> > > no atm ilmi-keepalive
> > > atm pvc 5 45 interface ATM0/0/0 5 45
> > >
> > >r7
> > >interface ATM1/0
> > > ip address 20.20.20.2 255.255.255.0
> > > no ip directed-broadcast
> > > atm pvc 1 5 45 aal5snap
> > > atm pvc 2 0 16 ilmi
> > > no atm ilmi-keepalive
> > >!
> > >ip classless
> > >no ip http server
> > >!
> > >!
> > >map-list cisco
> > > ip 20.20.20.1 atm-vc 1 broadcast
> > >
> > >
> > >debug atm ilmi
> > >
> > >3d07h: ILMI(ATM1/0):Sending out Request 1359
> > >3d07h: ILMI(ATM1/0):Sending out Request 1360
> > >3d07h: ILMI(ATM1/0):Retrying Request 1359
> > >3d07h: ILMI(ATM1/0):Sending out Request 1359
> > >3d07h: ILMI(TM1/0):Retrying Request 1360
> > >3d07h: ILMI(ATM1/0):Sending out Request 1360
> > >3d07h: ILMI(ATM1/0):Retrying Request 1359
> > >3d07h: ILMI(ATM1/0):Sending out Request 1359
> > >3d07h: ILMI(ATM1/0):Retrying Request 1360
> > >3d07h: ILMI(ATM1/0):Sending out Request 1360
> > >3d07h: ILMI(ATM1/0):Retry expired for Request 1359
> > >
> > >Thanks,
> > >
> > >
> > >
> > >
> > >
> > >Steven Clubb
> > >Network Engineer
> > > <http://www.cattech.com/>
> > >Phone:
> > >408.341.1722
> > >Cell:
> > >408.568.8854
> > >FAX:
> > >408.341.1720
> > >
> > >sclubb@cattech.com <mailto:sclubb@cattech.com>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:08 GMT-3