From: SherefMohamed@xxxxxxx
Date: Fri Dec 15 2000 - 15:47:36 GMT-3
How do you use the tc value in your math to determine the bc or the be
values !
Thanks
Sheref
"YJC"
<stiff.yu@datacraft To: "Justin Menga" <Justin.M
enga@computerland.co.nz>, "CCIE Group
-asia.com> Study (E-mail)" <ccielab@groupst
udy.com>
Sent by: cc:
nobody@groupstudy.c Subject: Re: frame-relay tra
ffic shape
om
12/14/2000 07:52 PM
Please respond to
"YJC"
but you show frame-relay pvc,you can see tc is 0.125s.
how do you think tc is 1s.
thanks
----- Original Message -----
From: Justin Menga <Justin.Menga@computerland.co.nz>
To: YJC <stiff.yu@datacraft-asia.com>; CCIE Group Study (E-mail)
<ccielab@groupstudy.com>
Sent: Saturday, December 09, 2000 5:17 PM
Subject: RE: frame-relay traffic shape
> Hi,
>
> 1. The difference is that using frame-relay traffic-rate command, the tc
is
> assumed to be 1 second. Hence your bc and be reflect values if tc=1
>
> 2. a
>
> Regards,
>
> Justin Menga MCSE+I CCNP CCSE ASE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
>
> -----Original Message-----
> From: YJC [mailto:stiff.yu@datacraft-asia.com]
> Sent: Wednesday, 6 December 2000 8:59 p.m.
> To: CCIE Group Study (E-mail)
> Subject: frame-relay traffic shape
>
>
> hellow,
>
> I have two question.
>
> 1, what differnce when i use frame-relay traffic-rate or frame-relay
bc,cir
> ,be;
> for example:cir=48000,cir+eir=64000,tc=0.125
> the below is my config and sh frame-relay pvc,you can see many
> difference,why?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:03 GMT-3