From: zhangxianqi (xianqizhang@xxxxxxxx)
Date: Fri Dec 15 2000 - 02:04:26 GMT-3
hi,
if the switch have cgmp open,but a router have not open the cgmp,the router can
still receive and send multicast?because no switch,could you try it and tell m
e the answer?
------(e1)r1(e0)-----------cat--------------(e0)r2(e1)----------
r1: int e 1
ip add 10.0.1.1 255.255.255.0
ip pim dense-mode
ip igmp join-group 239.1.1.1
int e 0
ip add 20.0.1.1 255.255.255.0
ip pim dense-mode
ip cgmp enable
cat : set cgmp enable
r2: int e 0
ip add 20.0.1.2 255.255.255.0
ip pim dense-mode ----------------------->>but r2 have not open cgmp
int e 1
ip add 30.0.1.1 255.255.255.0
ip pim dense-mode
ip igmp join-group 239.2.2.2
the igp between r1 and r2 is any,so r1 and r2 have all the route.
question: can r2 ping 239.1.1.1? can r1 ping 239.2.2.2?
TIA
Regards
xianqi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:02 GMT-3